Gold Plated: Jewelry with a layer of gold on top of a base metal.
Hoop Earrings: Earrings in the shape of hoops.
Inlay: Setting stones into a channel or space so they lay flush with the surface of the metal.
: A piece of jewelry with a wafer thin coating of gold electroplated or mechanically plated onto a base metal. The gold plating is often coated thicker when applied over 925 Sterling Silver and can last for many years.
Gold-plated metal has a very thin layer of gold on the surface, usually applied by the process of electroplating. Pieces that are gold plated are often marked G.E.P., gold electroplate, gold plated, or electro-plaqu? d'or.
A thin coating of electroplated or mechanically plated gold on top of a base metal.
An alloy of gold, silver, zinc, and often cadmium.
Gold Plated Jewelry employs a base metal which is then electroplated with gold. Usually a steel or brass item dipped into a bath of electroplating solution that deposits a thin layer of gold on the jewelry.
- refers to an item with a layer at least 10 karat gold bonded to a base metal.
Gold Tone - Jewelry finished with a gold color.
Gold Plated - In this type of finish, a very thin layer of gold is applied on the surface, usually by electroplating. Jewelry pieces with this finish are often marked G.E.P, gold plated or gold electroplate.
Means that a Base Metal, such as brass, has been covered with a thin layer of real gold. This must conform to an industry standard thickness of .15mm to .25mm and of at least 10 carats.
GOLD PLATED A thin layer of electroplated gold on base metal. All gold plated items are not plated with fine gold; some are only plated gold in color. A marking of 14K H.G.E. or 18K H.G.E.
Jewellery (also known as GEP or GP)
jewellery describes jewellery that has a layer of gold applied to a base metal by an electrolytic process. This gives a look similar to karat gold. The gold plating will wear off after time.
Gold plated usually means there is no actual gold content unless it is preceded by the karat, such as 18Kt gold plated or 18Kt H.G.E. (heavy gold electroplate).
is where a thin layer of gold is deposited onto copper or silver (to make silver gilt) by chemical or electrochemical means. Depending on how thick the gold layer is will influence how quickly the surface tarnishes.
Gold plated over silver
Silver is the "base" metal
For information on the care and cleaning of jewelry, please visit this article: Jewelry Care ...
Girandole - Style of earring or brooch where one large stone or decorative element suspends three smaller, pear-shaped pendants of similar design.
gold plated 8"
Tibetan Buddhism, With Its Mystic Cults, Symbolism and Mythology, and in Its Relation to Indian Buddhism
by Austine Waddell
Paperback (1972) ...
or gilded silver
A small ornamental bottle, meant to carry smelling salts or other aromatics ...
Gold Filled, Gold Plated & Vermeil
Alternative types of gold jewelry include gold filled, gold plated and vermeil. Over time, gold plating and vermeil will wear off, requiring re-plating.
Gilt or dipped in gold.GirandoleChandelier earrings that feature three distinct dangling parts.GirdleThe band around the widest part of a cut stone, where the crown meets the pavilion.
An item where the center is generally made of base metal and a very thin layer of gold has been applied, often by electroplating. Gold plating is not very durable, but it is much less expensive than gold filled items.
Cleaning gem set silver/ jewellery
Follow instructions above as for plain silver jewellery.
To restore the sparkle back to gem stones use a soft toothbrush and clean the back of stones where dirt can accumulate.
McClelland Barclay was a costume jewelry company that made very high quality pieces, often gold plated with colored rhinestones and a geometric design. He also made jewelry pieces in sterling silver and trays in anodized aluminum and bronze.
This type of finish is referred to as jewelry and normally has a reputation of not lasting long. Manufacturers of these types of chains often rely on putting a coating onto their chains to extend the wearing life of the product.
Vermeil (ver-may), a special type of gold plated product, consists of a base of sterling silver that is coated or plated with gold.
Pewter items may be described and marked as such if they contain at least 90% tin.
Acrylic (PMMA) Bioplast Blackline Glass Glow In The Dark Gold Natural Materials PTFE Silicone Silver Surgical Steel Titanium Ultra Violet (UV) Zircon Gold » All Jewellery Materials
Places on Body ...
Like- plain eyebrow rings made of silver, gold, platinum, titanium, steel or any other cheap metal, gold plated steel rings, captive bead eyebrow rings, ...
The amethyst skull iamges has hinged jaw made from copper or bronze that ha s been .
And dish in front was for offerings of incense or seeds.skull is 5 inches ntall and has turqouise gemstones as eyes ...
LAUREN G. ADAMS Stylish Necklace With 46.25ctw Cubic zirconia Well Made in Two tone Enamel, 14K/925 Gold plated Silver and Blue Nylon. Total item weight 29.1g
Terms & Jewelry Trade Jargon ...
Flower brooch, unsigned as the
"Eisenberg Original Sterling" signature was rubbed off in polishing, 1943.
Assuming this to be a brooch over sterling this is
a wonderful example of vermeil.
Click the above image to enlarge.
Pinchbeck A metal (not found in today's jewelry) made from the combination of copper and zinc to look like gold. Wears very well. Often, mistaken for gold filled and gold plated items.
Since 1931, Ciner began producing high-end costume jewelry with very good quality stones (including Swarovski rhinestones) and 18-carat finishes. Their "pearls" are specially made by coating glass beads with pearl luster many times.
A term ordinarily used to describe jewelry comprised of imitation stones and base metal, however some older costume jewelry contains inexpensive gemstones and gold plated sterling
Cultured Pearl ...
A layer of 14kt gold is put over brass by heat and pressure bonding. Gold filled has an actual layer of gold, while merely has a microscopic film.
Base Metal - Base metal is a mixture of non precious metals. Typically a metal from the group; copper, aluminum, nickel, tin, zinc and lead. It is frequently used as a base for gold-filled, gold plated or rolled gold plate coverings.
Gold-plating of base metals such as Brass or Bronze are sometimes erroneously referred to as Vermeil. When base metals are plated with thin layers of Gold, they should be referred to as , not Vermeil. (Pronounced: ver-may) ...
If there is no apparent change, the piece is probably solid gold. A green streak on an otherwise unaffected surface indicates a gold plated object made of base metal.
as well, but I think the wealthy people had access to new designs and new ideas earlier on. But also, if you want to look at a pair of Greek earrings in a museum, a pair from a royal burial are usually far more spectacular than some ...
10 karat gold is still legally called gold, but is very cheap and should be avoided. Some jewelry is simply gold plated (termed gold filled), and is very inexpensive.
white, platinum, rhodium, silver, gold filled, etc. Testing metals and manufacturing process (cast, hand fabrication, die struck, machined)
General jewelry: Mass-produced vs. custom, antique and period vs.
A problem with the initial "kp" has occurred as some buyers mistakenly believe the mark stands for "gold plated".Point:An industry term referring to a unit of weight, generally in regards to diamond carat weight. One point equates to 0.
See also: Gold plate, Jewel, Gold, Silver, Stone